美国泰克TCP305示波器电流探头

TCP305美国泰克示波器电流探头的性能特点：

Features & Benefits

• AC/DC Measurement Capabilities

• DC – 100 MHz, Current Probe Amplifier （TCPA300） uses:

• DC – 100 MHz, 30 A DC （TCP312）

• DC – 50 MHz, 50 A DC （TCP305）

• DC – 15 MHz,  A DC （TCP303）

• DC – 50 MHz, Current Probe Amplifier （TCPA400） Uses:

• DC – 2 MHz, 750*¹ A DC （TCP404XL） （500 A DC Continuous）

• Automatic Scaling and Units*² – Oscilloscope On-screen Readout of Magnitude and Amps reduces Measurement Errors with No More Hand Calculations

• AC/DC Input Coupling

• Low Insertion Impedance reduces Device Under Test Loading

• Split-core Construction allows Easy Circuit Connection

• Status Indicators provide Visual Operating Status and Notification of Potential Error Conditions – Degauss, Probe Open, Overload, Not Terminated into 50 ?, Noncompatible Probe Type

• Lower DC Drift and Noise allows Improved Low-level Current Measurements

• Certified for use in U.S., Canada, and Europe. Complies with applicable IEC Standards.

• 
  
  

TCP305美国泰克示波器电流探头的主要介绍：

Applications

• Development and Analysis Solutions for Designers, Installers, and Service Personnel in ecomm, Data Comm, Computer, and Semiconductor Power Electronics Environments for:

• Power Supplies （Switching and Linear）

• Semiconductor Devices （SCRs, IGBTs, MOSFETs, CMOS, BJTs）

• Power Inverters/Converters

• Electronic Ballasts

• Industrial/Consumer Electronics

• Communications （Phone, Salite, Relay Stations）

• Motor Drives

• Transportation Systems （Electronic Vehicles, Electric Trains, Locomotives, xunshouionics）

  
  

Increased Performance and Simplicity

The TCP300 and TCP400 Series AC/DC current measurement family is a highly advanced current measurement system for today&＃39;s current measurement needs. When connected to Tektronix oscilloscopes with TEKPROBE Level II, TekConnect （w/ TCA-BNC）, or TekVPI （w/ TPA-BNC） interfaces, current measurements and calculations are simple and easy.

*¹ Derated with duty cycle.

*² Requires a TDS TEKPROBE oscilloscope or a TekConnect oscilloscope with TCA-BNC.

Meets Today&＃39;s AC/DC Current Measurement Applications

The TCPA300 amplifier, when used with TCP312, TCP305, or TCP303 probes, provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. These three probes provide current measurement capabilities of 30 A, 50 A, and  A DC continuous. For even higher current levels, the TCPA400 amplifier with the TCP404XL current probe measures 500 A DC continuous and 750 A DC continuous, derated with duty cycle.

Higher frequency performance is xunshouailable with the TCP312 w/TCPA300 providing ≥100 MHz bandwidth and a maximum current of 30 A DC.

Measurement Errors and Manual Calculations are Now a Thing of the Past

With this new series of current measurement tools, automatic control and on-screen scaling and units is provided for users of Tektronix TDS3000, TDS500, TDS600, TDS700, TDS5000, TDS6000, and TDS7000B Series oscilloscope systems （the DPO3000, MDO/MSO/DPO4000, MSO/DPO5000, and DPO7000 Series oscilloscopes, the TPA-BNC adapter is required）.

The TCP300/TCP400 current measurement systems seaessly integrate with your TDS Series oscilloscope.

Even non-TEKPROBE systems can use the TCPA300/400 Series to make proper current measurements by simply multiplying the measured output voltage on the oscilloscope by the TCPA300/400 Series range setting.

本公司回收以下各类仪器：

NI (美国大家仪器)、Tektronix泰克、HP/Agilent/Keysight（惠普/安捷伦/是德）、Keithley（吉时利）、KIKUSUI（菊水）、Panasonic（松下）、MINOLTA（美能达）、Anritsu（安立）、 ADVANTEST（爱德万）、FLUK(福禄克)、MARCONI（马克尼）、R/S（罗德&施瓦茨）、Chroma(致茂/可罗马) 、Prodigit(博计) 、Extech(华仪)、JDSU(捷迪讯）、Ando（安腾）、Aeroflex（迅收法斯）、ITECH(迅收德克斯)、STANFORD（斯坦福）、Lambda（电盛兰达）、YOKOGAWA（横河）、EMCSOSIN（索莘）、RIGOL（普源）、IQ（莱特波特）、Lecroy（力科）、SUNLILAB（阳光）、Prima（普锐马）、TOPCON（拓普）、SPIRENT(思博伦）、3ctest（泰斯特）、CYBERTEK(知用）、SHIBASOKU（芝测）、HAMEG（惠美）、TEXIO（德士）、EXFO（爱斯福）、GWINSTEK （固纬）